Cupra Born EV Electric Car Charging Cable

Charging your Electric car:

1. Ensure your car is parked so that the vehicles inlet socket is within 4 metres of the charge point socket.

2. Unwind your car charger lead.

3. Push the car side connector firmly in, ensuring that the car charging socket is clear.

4. Push the remaining plug firmly into the charging point socket. Your electric car is now ready to charge!

* When disconnecting the charger you must remove the plug from the vehicle first, and then from the charging station last. This allows time for the lock to disengage in the charging socket.*

° Regularly check your charger cables and connector plugs to ensure they are in good condition.

°Avoid driving over the cables or connectors.

°Do not let the connectors fall into standing water.

°Avoid letting the cables or connectors come into conact with any oil or hazardous chemicals.

°Ensure the cable is kept dry and stored in a suitable carry case.

°Avoid excessive pinching or chaffing to the cable.

° If the outer of the cable is broken in any way DO NOT use until replaced.

° If the contact pins or tubes in the connectors are broken in any way DO NOT use until replaced.

° Regularly clean your cable with a soft damp cloth to remove any debris.

° Always remove your cable from the car first before removing from any charging station to avoid getting your cable stuck.